Dust Muzzle II
Dust Muzzle II White
Dust Muzzle II Yellow
Dia. in inches
Dust Muzzle II with Universal Adapter and Hose - $79.95
The Dust Muzzle uses the centrifugal forces created by the grinding wheel to push the dust out of the exhaust
port. When connected to a Dustless Vacuum system, the Dust Muzzle can remove up to 95% of the pollutants
at the point of origin. The universal adapter is designed to be used with the Dust Muzzle Type II. Will fit any 5"
or 7" angle grinder. Includes Hose, Universal Adapter and Dust Muzzle.

General Notes:
  • Always use the 8" Dust Muzzle for 7" diamond Cup wheels and soft pads.
  • Use the 7” Dust Muzzle with 7” Cover Plate  for the 7” diameter Crack Sealer Blades  and 7” Tuck Point
    Blades.
  • Always use the 7” Dust Muzzle for 7” Zec Wheels and 7” Sanding Discs.

Included in the box:
  • 1 - Universal Jaws Adapter Ring and 2 band Clamps
  • 1 - Dust Muzzle II Shroud of designated size
  • 3 - Plastic adjustment Washers
  • 1 - 18" Hose for connecting Shroud to 2" Shop Vac Hose
  • 1 - Black Plastic Band for attaching power Cord to hose
  • 2 - Socket Head Screws for applications where these are required
Dust Muzzle II Kit
Dust Muzzle II Replacement Kit (2 Pack) - $59.95
Dia. in inches
General Note:
  • This is a 2 pack of replacement universal dust muzzles. You must
    have the Universal Adapter before you can use the replacement 2
    pack.

Included in the box:
  • 2 - Dust Muzzle II Shrouds of designated size
  • 2 - Band Clamps
  • 2 - Black Plastic Band for attaching power Cord to hose
  • 1 - Instruction Sheet
Dust Muzzle II Adapter Ring
Universal Adapter Ring - $34.95

The universal adapter rings have adjustable jaws and clamps that are
designed to be used with the Dust Muzzle Type II Shrouds.
The
5" adapter will fit the 5" Dust Muzzle II Shroud and is used for 4.5" or 5"
Angle Grinders.
The
7-8" adapter will fit  the 7" or 8" Dust Muzzle II Shroud and 7" or 8" Angle
Grinders.

Included in the box either:
  • 5" Universal Adapter Ring with 2 Clamps for 5" Dust Muzzle II Shroud
    or
  • 7-8" Universal Adapter Ring with 3 Clamps for either 7" or 8" Dust
    Muzzle II Shroud
Please specify: 5" or 7-8" adapter when ordering.
Dia. in inches
Dust Muzzle II Shroud
5" and 7" Dust Muzzle II
Dust Muzzle II Shroud
8" Dust Muzzle II
Dust Muzzle II Shroud - $22.95

5", 7", or 8" Replacement universal dust muzzle. You must have the Universal
Adapter before you can use the replacement shroud.
Dia. in inches
General Notes:
  • Always use the 8" Dust Muzzle for 7" diamond Cup wheels and soft pads.
  • Use the 7” Dust Muzzle with 7” Cover Plate  for the 7” diameter Crack Sealer Blades  and 7” Tuck
    Point Blades.
  • Always use the 7” Dust Muzzle for 7” Zec Wheels and 7” Sanding Discs.

Included in the box:
  • 1 - Dust Muzzle II Shroud (no Band Clamps)
Dust Muzzle Ultra
Dust Muzzle Ultra
Dia. in inches
Dust Muzzle Ultra - $29.50

  • The Most Affordable Universal Dust Muzzle
  • Fits all 5" and 7" Angle Grinders
  • Transparent - Lightweight - Made from Rugged Polypropylene
  • Flexible down to -20 Degrees -
  • Installs in Minutes - Up to 95% Efficient
The Dust Muzzle Ultra is based on the design of the original Dust Muzzle and is the most efficient design
available for right angle grinders. The Dust Muzzle Ultra uses the centrifugal forces created by the grinding
wheel to push the dust out of the exhaust port. When connected to a Dustless Vacuum system, the Dust
Muzzle can remove up to 95% of the pollutants at the point of origin.

The Dust Muzzle Ultra uses an adjustable collar, spacer washers and set of flexible adapter rings designed
to accommodate the entire range of collar diameters and grinding wheel configurations for both 5" and 7"
grinders.

Included in the box:
  • 2 - Adapter Rings and 1 Band Clamps
  • 1 - Dust Muzzle Ultra Shroud of designated size (5" or 8")
  • 3 - Plastic Adjustment Washers
  • 1 - Cable Tie for securing Vacuum Hose
Dust Muzzle Cover
Cover Plate for 5" Dust Muzzle - $9.95
Cover Plate for 7" Dust Muzzle - $14.95
The Dust Muzzle can be converted to an efficient dust collector when cutting with the edge of a saw blade, a
tuck pointer or a crack sealer.
This snap on cover plates can be attached to any 5" or 7" Dust Muzzle. The 5" Dust Muzzle/Cover Plate
combination will work with saw blades, crack sealers and tuck pointers with diameters from 4" to 5". The 7"
Dust Muzzle/Cover Plate combination will work with 6" and 7" saw blades, crack sealers and tuck pointers.
When used with the cover plate, the worker can make dustless cuts in tile, cement, fiberglass or other
materials when using diamond or carbide tipped saw blades and wheels.

Included in the box:
  • Cover Plate of designated size with instructions for cutting the Dust Muzzle Shroud (sold separately)
Sidewalk Savers™, Ltd.
886 East College Avenue, Westerville  OH  43086-0064 USA
Tel: 1-614-882-0499
info@sidewalksaver.com
Copyright © 2009 - 2015 Sidewalk Savers™
Dust Muzzles
Sidewalk Repair