|
|
|
Single Row Diamond Cup 4.5"
Single Row Diamond Cup is designed for fast grinding and material removal of general applications of concrete, stone and
masonry. Diamond grit - Coarse 40/50, 50/60. Cut Method - Dry.
|
|
|
"Grizzly 7" Single Row Diamond Cup
Single Row Diamond Cup is designed for fast grinding and material removal of general applications of concrete, stone and
masonry. Diamond grit - Coarse 40/50, 50/60. Cut Method - Dry.
|
|
|
Crack Sealer Blade 4.5"
Crack Sealer Blade is designed to widen cracks for concrete repair to provide a smooth, clean opening for sealing. Diamond
grit - Coarse 40/50, 50/60. Cut Method - Dry.
|
|
|
Sintered Turbo Diamond Saw Blade 4.5" and 5"
Sintered Turbo Diamond Saw Blade is recommended for general purpose cutting of masonry, tile, stone, block, concrete, brick
or medium hard granite. Cut Method - Dry.
|
|
|
Sintered Turbo Diamond Saw Blade 7"
Sintered Turbo Diamond Saw Blade is recommended for general purpose cutting of masonry, tile, stone, block, concrete, brick
or medium hard granite. Cut Method - Dry.
|
|
|
ZEC Wheel 4.5"
Quality A++. This wheel aggressively removes paint, mastic, epoxy and other materials that would ordinarily load up a diamond
cup wheel. Use this wheel with a 5” Dust Muzzle before the final roughing up of the concrete with a diamond cup wheel.
|
|
|
ZEC Wheel 7"
Quality A++. This wheel aggressively removes paint, mastic, epoxy and other materials that would ordinarily load up a diamond
cup wheel. Use this wheel with a 7” Dust Muzzle before the final roughing up of the concrete with a diamond cup wheel.
|
|
|
Center Hub
The Center Hub provides for easy mounting & removal of Grinding Cups or Blades as well as proper spacing to accommodate
the Dust Muzzle™ vacuum system.
|
|
|
|
Dust Muzzle II with Universal Adapter and Hose
The Dust Muzzle uses the centrifugal forces created by the grinding wheel to push the dust out of the exhaust port. When
connected to a Dustless Vacuum system, the Dust Muzzle can remove up to 95% of the pollutants at the point of origin. The
universal adapter is designed to be used with the Dust Muzzle Type II. Will fit any 5" or 7" angle grinder. Includes Hose,
Universal Adapter and Dust Muzzle.
|
|
|
|
|
|
|
|
Dust Muzzle II with Universal Adapter and Hose
This is a 2 pack of replacement universal dust muzzles. You must have the Universal Adapter before you can use the
replacement 2 pack.
|
|
|
Cover Plate for Dust Muzzle
The Dust Muzzle can be converted to an efficient dust collector when cutting with the edge of a saw blade, a tuck pointer or a
crack sealer.
This snap on cover plates can be attached to any 5" or 7" Dust Muzzle. The 5" Dust Muzzle/Cover Plate combination will work
with saw blades, crack sealers and tuck pointers with diameters from 4" to 5". The 7" Dust Muzzle/Cover Plate combination will
work with 6" and 7" saw blades, crack sealers and tuck pointers.
When used with the cover plate, the worker can make dustless cuts in tile, cement, fiberglass or other materials when using
diamond or carbide tipped saw blades and wheels.
|
|
|
|
|
|
|
|
|
Loveless Dry Ash Fine Particle Drywall Vacuum
The dust collection tools as offered by Sidewalk Savers™ will only work as well as the vacuum system that is behind it. Vacuum
power is measured with two statistics: the cubic feet of air (CFM) that is moved through the filters and the height to which the
motor will pull a column on water (water column). Water column is also an indicator of how well the vacuum will maintain the
rated CFM when the filter gets dirty. The standard vacuums found in the hardware stores will usually have ample CFM but they
are lacking in water column. When the filter becomes clogged, they quit pulling.
Another shortcoming of the standard vacuums is the filter system. Most of these models have a single cartridge filter similar to
the air filter on a car. They have very little surface area and they are easily clogged. Once they are clogged, they quit working and
our dust collection products become inefficient. Sidewalk Savers (tm) can offer an excellent American made vacuum that is
completely compatible with our dust collection products.
The Drywall Vacuum is an excellent 120 Volt, 11.8 Amp vacuum at a very reasonable price. It is a 119 CFM, 16 gallon wet-or dry
vacuum on casters with a heavy duty hose and a complete set of attachments. Whereas the more common vacuums found in
the hardware stores have between 30-40" of water column, our Drywall Vacuum has 76". The vacuum also has a triple filtration
system. There are two wet-or-dry filters that surround the motor and these can be cleaned by shaking a cleaning "noggle" on
the outside of the vacuum. In addition to these there is a micro pre-filter bag that can be installed in the canister.
This vacuum does the job of vacuums costing more than $1,500.
|
|
|
|
|
|
|
|
|
Micro Pre-Filter Bag
The micro pre-filter bag is installed in the dry vacuum canister. This is a .5 micron disposable filter that will hold up to 30 pounds
of concrete dust. It works similar to the home vacuum system in which the filter is thrown away once it is full of dust. When this
filter is installed, the two filters that surround the dry vacuum motor will rarely need cleaning.
The micro pre-filter bags come in packs of two.
|
|
|
JEPSON 4.5" Grinder
JEPSON Model 4045 (4.5" / 115mm) Grinder (Double Insulated) with all ball bearing construction, hardened steel gears, and
high output motor, this grinder is up to the job! The Model 4045 grinder feature a new paddle switch design that has a lock out
for safety. The Jepson Model 4045 grinder (4.5") uses Model 515 Dust Muzzle.
Specifications
Power Input 9.2A 115V (1,050W 230V)
No Load Speed (RPM) 11,000
Wheel Diameter 4-1/2" (115mm)
Spindle Thread 5/8"-11NC/M14x2
Overall Length 12-1/2" (317mm)
Cord 8.2ft (2.5m)
Net Weight 6.4lbs (2.9kgs)
Accessories
1 lock nut wrench, 1 inner flange, 1 lock nut, 1 side handle
|
|
|
Makita 7"/9" Angle Sander #GA7911
This Heavy Duty Makita Grinder with all Ball and Needle Bearing construction was selected by Sidewalk Savers Ltd. for its
heavy duty, no frills characteristics.
Standard Equipment:
- Side handle (273480-5)
- Spindle washer (261039-0)
|
Specifications
|
|
Features
|
Power Input
|
15A 115V
|
All ball and needle construction for long life
|
No Load Speed (RPM)
|
6,000
|
Extra heavy-duty motor for high production and
|
Wheel Diameter
|
7"/9" (180/230mm)
|
continuous use
|
Spindle Thread
|
5/8"-11UNC
|
Removable side handle can be mounted on either side
|
Overall Length
|
16-1/4" (412mm)
|
Rugged housing for long life
|
Net Weight
|
12.2lbs (5.5kg)
|
Spindle lock for easy wheel changes
|
Shipping Weight
|
16lbs (7.25kg)
|
|
|
|
|
|
|
|
